How
to Install Firmware on Cubot X18 Plus Power Flash File, Cobut
is an Android smartphone circulating in the vast community nowadays, this
Android phone is a very good development of an ideal system and also a stable
for teenage users today. As for this Android phone cobut glitches such as
re-recovery, hard reset and recovery reset, fail to update the latest system,
incoming virus, application failure and other Android system interference.
Below how to fix a defective Android phone system cobut damaged.
Preparation
Stock Rom / Firmware Cubot X18 Plus
Firmware Cubot X18 Plus
[Download] MTK USB Driver
[Download] VCOM Driver
[Download] SP Flashtool V5
[Download] SP Flashtool v3
Important
Cubot X18 Plus :
1. Before
you re-flashing you need to note the battery at least 80% or full charger.
2. Make
sure the USB Driver is installed and the USB cable has support 2.0 or 3.0.
3. When
the flashing process lasts please do not unplug the USB cable between the
Android phone and the computer, and wait for flashing its firmware until it is
finished.
How
to Flashing Firmware Cubot X18 Plus :
1. Download, Extract, Install MTK and Vcom
Driver
2. Download, Extract, Install SPFlashtool
3. Download Stock Rom (Firmware) and
compatible with your device.
4. Run SPFlashtool and load stock
ROM/firmware.
5. Click Download on SPFlashtool.
6. Hold volume down on the phone and connect
the phone to the computer with USB.
7. Flashing process can teke up to 10-20
mins, wait for process to complete
8. Process is complete phone will reboot
How
to Install Stock ROM on Cubot X18 Plus Flash File, So
tutorial how to repair your phone Huawei custom rom, Cobut tools Hopefully can
be useful for you. Please provide your polite comments with your questions
hopefully this blog admin can respond well..